Preparing Window Aperture For Installation

Information 

• The surface coating of adhesive residue helps new adhesive to stick. Keep cut surfaces clean and free of grease and do not clean with cleaning solution  .

1. When removing adhesive residue with a cutter -C-  and flashing knife -D-  on the body, ensure that a surface coating of adhesive remains.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Removing adhesive residue on rear lid

   Information 

   • A drying time of 10 minutes must be observed between cleaning the bonding surface and applying primer! Remove all cleaning solution residue on the body  .
2. Clean new paint surfaces or damage to the top coat paint in the non-visible area of the window aperture in the body with cleaning solution -H1-  and touch up with primer -H2-  .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Cleaning and touching up paint surfaces and damaged areas