5X - Body General Information (971 Coupe)

• 5X00 Body - General Information
  • WM, 5X00IN01 Safety Instructions
    • Safety Instructions For Raising Vehicles
      • Danger Of Injury When Raising Vehicles
      • Damage When Raising Vehicles
    • General Warning Notices
      • Danger Of Injury While Welding
      • Safety Instructions For Dealing With Flying Sparks During Grinding And Welding Work
      • Safety Instructions For Grinding Work
      • Safety Instructions For Fuel Tank
      • Safety Instructions For Air Conditioning
    • Safety Instructions For Adhesive Bonding
      • Danger Of Poisoning And Injury When Using Adhesive
    • Safety Instructions For Assembly Work
      • Safety Instructions For Sharp-Edged Body And Unit Parts
      • Safety Instructions For Airbag System
    • Safety Instructions For Corrosion Protection
      • Safety Instructions For Stopper Location Plan (Body)
  • WM, 5X00IN02 Protection For Electric Components During Body Repairs
    • Information On Electronic Control Units
      • Notes
      • Protection Against Overvoltage When Performing Welding Work
      • Replacing Control Units
  • WM, 5X00IN03 Corrosion Protection Measures During Repair Work
    • Measures For Maintaining Long-Term Body Protection
    • Prerequisite For Ensuring Validity Of The Long-Life Guarantee
      • Prerequisite For Maintaining The Long-Life Guarantee
        • Porsche Long-Life Guarantee Conditions
  • WM, 5X00IN04 Body Construction Body Parts Of Various Sheet-Steel Strengths
    • Body Construction Materials
    • Ultra-High-Strength Steel
    • Very-High-Strength Steel
    • High-Strength Steel
    • Straightening Body Parts
    • Separation Points
    • Welding Work
  • WM, 5X00IN05 Body Construction Information On Aluminium Repairs
    • Tools
    • Technical Values
    • Body Construction Materials
    • Damage Diagnosis
      • Damage Diagnosis On Aluminium Components
    • Repair
      • Reshaping
    • Removing Dents On Accessories
    • Occupational Safety
      • Working On Surfaces
      • Corrosion Protection Measures
  • WM, 5X00IN06 Sealing Elements
    • Sealing Elements
  • WM, 5X00IN07 General Information And Notes On Quality
    • Tools
    • Battery Trickle Charge
      • Battery Trickle Charging
    • Information On Control Units
      • Information On Removing And Installing Control Units
      • Protection Against Overvoltage When Performing Welding Work
      • Information For Replacing Control Units
    • Information On Maintaining Long-Life Corrosion Protection Or The Long-Life Guarantee
      • Information On Maintaining Long-Life Corrosion Protection
      • Information On Maintaining The Long-Life Guarantee
  • WM, 5X00IN08 - Bonding Log
  • WM, 5X00IN10 Welding Aluminium
    • Tools
    • Technical Values
    • Welding Aluminium
  • WM, 5X00IN11 Stud Welding
    • Tools
    • Technical Values
    • Preparing For Stud Welding
    • Welding Parameters
    • Welding Studs
  • WM, 5X00IN20 Working With Body Structural Foam
    • Tools
    • Technical Values
    • General Information
      • Version Reference
      • Safety Data Sheet
      • Shelf Life
      • Disposal
      • Bonding Log
    • Structural Foam In Body Building
    • Working With Body Structural Foam
      • General Information
      • Preparing Bonding Surfaces
        • Initial Cleaning
        • Cleaning
      • Processing Conditions
      • Joining Process
      • Hardening
      • Assembly Strength
      • Endurance Strength
      • Corrosion Protection
      • Work Sample
  • WM, 5X00IN21 Working With Body Structural Adhesive Pah.071.781.00
    • Tools
    • Technical Values
    • General Information
      • Version Reference
      • Safety Data Sheet
      • Shelf Life
      • Disposal
      • Bonding Log
    • Information On Structural Bonding In Vehicle Manufacturing
      • General
      • Combined Joining Processes
      • Separating Body Components
      • Welding In Body Components
    • Working With Body Structural Adhesive Pah.071.781.00
      • General Information
      • Preparing Bonding Surfaces
        • Initial Cleaning
        • Cleaning
        • Sand/Grind Until Bare
      • Processing Conditions
      • Joining Process
      • Hardening
      • Assembly Strength
      • Endurance Strength
      • Corrosion Protection
      • Work Sample
  • WM, 5X00IN22 Processing Body Foam Filler
    • Technical Values
    • General Information
      • Version Reference
      • Safety Data Sheet
      • Shelf Life
      • Disposal
      • Bonding Log
    • Foam Filler In Body Building
    • Processing Body Foam Filler
      • General Information
      • Preparing Bonding Surfaces
        • Initial Cleaning
        • Cleaning
      • Processing Conditions
      • Joining Process
      • Hardening
      • Subsequent Work
      • Assembly And Endurance Strength
  • WM, 5X00IN23 Replacing Punch Rivets And Penetrated Joints
    • Parts
    • Tools
    • General Information
    • Releasing Joint Connections
      • Punch Rivets
      • Pressing Out Punch Rivets
      • Punch And Bottom Die Pairs
      • Pulling Punch Rivets
      • Welding Parameters For Pulling Punch Rivets
      • Penetrated Joints
      • Loosening Penetrated Joints
    • Making Joint Connection
      • Setting Blind Rivets
      • Setting Flow-Form Rivets
  • WM, 5X00IN24 Setting Self-Tapping Screws
    • Parts
    • Tools
    • Technical Values
    • General Information
    • Setting Self-Tapping Screws
  • WM, 5X00IN25 Making Ground Connections
    • Parts
    • Tools
    • Technical Values
    • Making Ground Connection Using A Through Bolt
    • Making Ground Connection Using A Rivet Nut
  • WM, 5X00IN26 Replacing Coarse Threaded Bolts
    • Parts
    • Tools
    • Technical Values
    • Replacing Coarse Threaded Bolts
    • Subsequent Work
  • WM, 5X00IN33 Thread Repairs For Threaded Bushes With Collar
    • Thread Repairs For Threaded Bushes With Collar
  • WM, 5X00IN34 Thread Repairs For Threaded Bushes Without Collar
    • Tools
    • Repair Procedure For Threaded Bush Without Collar
      • Overview Of Thread Repair Kits
  • WM, 5X00IN42 Seam Seal
    • Parts
    • Tools
    • Information
      • Instructions For Sealing Seams
    • Seam Welding
  • WM, 5X00IN44 Cavity Preservation
    • Cavity Preservation
  • WM, 5X00IN45 Vehicle Identification Number
    • Tools
    • Technical Values
    • Re-Imprinting New Vehicle Identification Number
      • Information
      • Spacer For Replacing The Vehicle Identification Number
      • Re-Imprinting Vehicle Identification Number
    • Encoding The Vehicle Ident. No
      • Encoding Vehicle Identification Number
    • Model Year Allocation
      • Notes
      • Allocation Of Position 8 - Model Type
      • Allocation Of Production Month
      • Allocation Of Production Year
  • WM, 5X00IN46 Replacing Identification Plate
    • Information
      • Overview Of Stickers/Plates
      • Replacing Identification Plate
  • WM, 5X00IN61 Work Sequence For Accident Repairs
    • Work Sequence For Accident Repairs
      • Procedure For Accident Repairs
      • Repairs
      • Replacement
  • WM, 5X00IN62 Procedure For Damage Diagnosis
    • Tools
    • Notes
    • Procedure For Damage Diagnosis
    • Identifiable Deformations On The Body Structure
    • No Identifiable Deformations On The Body Structure
  • WM, 5X00IN83 Connecting Elements For Body Repairs
    • Parts
    • Connecting Elements For Body Repairs
      • Rivets
      • Special Elements
      • Adhesive And Filler
  • WM, 5X00IN Technical Values
    • Technical Values
      • Overview
      • Front Door
      • Door Opener
      • Closing Aid Motor
      • Door Lock
      • Door Handle
      • Adjusting The Door
      • Rear Door
      • Technical Values - Reinforcement
      • Technical Values - Rear Lid
      • Technical Values - Sliding-Roof Panel
      • Technical Values - Lock Lower Part, Rear Lock Upper Part
      • Lock Lower Part, Front Lock Upper Part
      • Technical Values - Front Lid Hinge
      • Technical Values - Plenum Panel, A-Strut
      • Technical Values - Front Wing
      • Technical Values - Wheel Housing
      • Technical Values - Side Skirts
      • Technical Values For Underbody Cover
      • Technical Values - Dashboard Bracket
      • Technical Values - Rear Door
      • Technical Values - Filler Flap
      • Technical Values - Rear Lock Carrier
  • WM, 5X00IN Seam Seal
    • Parts
    • Tools
    • Information
      • Instructions For Sealing Seams
      • Seam Welding
  • WM, 5X00IN Vehicle Identification Number
    • Tools
    • Technical Values
    • Re-Imprinting New Vehicle Identification Number
      • Information
      • Spacer For Replacing The Vehicle Identification Number
      • Re-Imprinting Vehicle Identification Number
    • Encoding The Vehicle Ident. No.
      • Encoding Vehicle Identification Number
      • Model Year Allocation
      • Allocation Of Position 8 - Model Type
      • Allocation Of Production Month
      • Allocation Of Production Year
  • WM, 5X00IN Underbody Protection
    • Parts
    • Tools
    • Technical Values
    • Underbody Protection
  • WM, 5X00IN Replacing Identification Plate
    • Information
      • Overview Of Stickers/Plates
    • Replacing Identification Plate
  • WM, 5X00IN Gap Dimension
    • Technical Values
      • Overview
      • Gap Dimensions Of Front Lid
      • Gap Dimensions Of Rear Lid
      • Gap Dimensions Of Front Wing
      • Gap Dimensions Of Windscreen
      • Gap Dimensions Of Rear Window
      • Gap Dimensions For Sliding-Roof Panel
      • Gap Dimension Of Rear Spoiler