Gap Dimensions Of Front Wing
| Location | Description | Type | Basic value | Tolerance |
|---|---|---|---|---|
| Front lid to wing (K1) | Gap dimension | 3 mm | +/- 0.7 mm | |
|
Gap dimension |
||||
| Front lid to wing (K2) | Offset | Gap dimension | 0 mm | +/- 0.5 mm |
|
Gap dimension |
||||
| Front wing to door (K3) | Gap dimension | 3.0 on 3.5 mm | + 0.7 mm - 0.5 mm |
|
|
Gap dimension |
||||
| Front wing to door (K4) | Offset | Gap dimension | - 0.5 mm | + 0.3 mm - 0.7 mm |
|
Gap dimension |
||||
| Front wing to A-pillar (K5) | Contour | Gap dimension | 3.5 on >4.5 mm | +/- 0.9 mm |
|
Gap dimension |
||||
| Front wing to door entry guard (K6) | Gap dimension | 3 mm | +/- 1 mm | |
|
Gap dimension |
||||
| Front wing to door entry guard (K7) | Offset | Gap dimension | 0 mm | +/- 1.5 mm |
|
Gap dimension |
||||