LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2022 >> Panamera Base >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 53 - Body Rear (971 Wagon) >> 5368 Wheel Housing Rear >> WM, 536855 Replacing Wheel Housing Rear (Inner Section) >> Removing Wheel Housing Rear (Inner Section) >> Removing Rear Wheel Housing (Inner Section)

Removing Rear Wheel Housing (Inner Section)

Fig 1: Rear Wheel Housing Component Location (Inner Section)
G16370848

Installation position

  1. Drill out spotwelds.
    G16370849

    Spotwelds

  2. Drill out penetrated joints.

    > 5X00IN23 REPLACING PUNCH RIVETS AND PENETRATED JOINTS

    G16370850

    Penetrated joints

  3. Separate welded seams.
    G16370851

    Welded seams

  4. Set cut at the marked position -dimension A-  .

    > Distance 85 mm 

    G16370852

    Cut

  5. Heat bonding areas -A, B and C-  using > V.A.G 1416 - Hot-Air Blower  .
    G16370853

    Bonding areas

  6. Remove (inner) rear wheel housing section.
scientia non olet · About LEMON Manuals