Preparing Frame For Light (Saloon)

1. Fit in frame for light (Saloon) and secure it to the body.
2. Fit in reinforcement -1-  and secure it to the body.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Reinforcement

3. Drill bores for blind rivets. > Diameter 6.6 mm 

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Blind rivets

4. Drill bores for flow-form rivets. > Diameter 4 mm 

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Flow-form rivets

5. Punch holes for flow-form rivets.

   > 5X00IN23 REPLACING PUNCH RIVETS AND PENETRATED JOINTS

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Flow-form rivets

6. Remove reinforcement.
7. Remove frame for light (Saloon).
8. Prepare marked areas on frame for light (Saloon) for joining.

   > 5X00IN21 Working with body structural adhesive

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Frame for light (Saloon)

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Frame for light (Saloon)

9. Prepare marked areas on reinforcement for joining.

   > 5X00IN21 Working with body structural adhesive

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Reinforcement