Technical Values
| Location | Des... | Type | Basic val... | Toleranc... | Toleranc... |
|---|---|---|---|---|---|
| Dimension A | Distance | Approx. 52 mm | |||
| Drill bit | Diameter | 4 mm | |||
| Drill bit | Diameter | 4 mm | |||
| Drill bit | Diameter | 6.6 mm | |||
| Drill bit | Diameter | 6.6 mm | |||
| Applying adhesive | Application depth | 0.5 mm | |||
| Applying adhesive | Application depth | 0.5 mm | |||
| Applying adhesive | Application depth | 0, 5 mm | |||
| Applying adhesive | Application depth | 3 mm | |||
| Applying adhesive | Application depth | 0, 5 mm | |||
| Applying adhesive | Application depth | 3 mm | |||
| Applying adhesive | Application depth | 0.5 mm | |||
| Applying adhesive | Application depth | 0.5 mm | |||
| Applying adhesive | Application depth | 3 mm |