Technical Values

Location	Des...	Type	Basic val...
Milling depth for M12 threaded bushing	Dimension X (measured from outer sheet metal edge)	Test and adjustment value	12 mm
Thread depth, M12	Dimension Y (measured from outer sheet metal edge)	Test and adjustment value	40 mm
Thread 1	Dimension Y	Length	9.4 mm
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Thread repairs on spring strut mount M6
Thread 2	Dimension Y	Length	16.2 mm
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Thread repairs on spring strut mount M8
Thread 3	Dimension Y	Length	20 mm
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Thread repairs on spring strut mount M8x20
Thread 3	Dimension X	Length	5 mm
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Thread repairs on spring strut mount M8x20
Thread 1	Dimension Y	Length	20 mm
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Thread repairs on rear tunnel
Thread 1	Dimension X	Length	5 mm
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Thread repairs on rear tunnel
Thread 2	Dimension Y	Length	25 mm
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Thread repairs on rear tunnel
Thread 2	Dimension X	Length	5 mm
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Thread repairs on rear tunnel
Thread 3	Dimension Y	Length	9.4 mm
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Thread repairs on rear tunnel
Milling depth for M14 threaded bushing on rear axle	Dimension X (measured from outer sheet metal edge)	Test and adjustment value	4 mm
Thread depth, M14, rear axle	Dimension Y (measured from outer sheet metal edge)	Test and adjustment value	35 mm
Thread 1	Dimension Y	Length	20 mm
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Thread repairs on rear impact absorber plate
Thread 1	Dimension X	Length	5 mm
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Thread repairs on rear impact absorber plate
Thread 2	Dimension Y	Length	25 mm
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Thread repairs on rear impact absorber plate
Thread 2	Dimension X	Length	5 mm
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Thread repairs on rear impact absorber plate