Preparing Connection Areas Of Body For Installing Seat Cross Member

Align the sealing surfaces and connections of the body.
De-burr connection points and prepare them for joining.
Information
- Before final assembly, make sure you fully understand all the work steps involved and carry out a trial assembly without applying adhesive.
- The bonding process can only be carried out reliably when a smooth and swift sequence of operations is guaranteed.
- Do not begin bonding work until all materials and tools necessary for later repair work are available.
Prepare marked areas for bonding and riveting.
> 5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Preparing marked areas

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Preparing outer marked areas