Subsequent Work For Body Repairs
- Release and remove vehicle from the straightening system.
- Clean joint areas and sheetmetal flanges with a wire brush.
- Prime joint areas and sheetmetal flanges with 2K primer.
- Restore standard seal using body sealant.
> 5X00IN42 Seam seals
Also seal the repair area carefully.
- Paint repair area and adjacent surfaces, if necessary.
- Restore standard underbody protection using underbody sealant.
- Apply standard cavity preservation.
> 5X00IN44 CAVITY PRESERVATION
Also carefully apply cavity preservation to the repair area.
- Install removed accessories in the repair area.