Removing Rear Underbody Cover

Information 

• The number of screws, clips, electric plug connections, holders and trim panels can vary depending on equipment. 
• The illustrations for removing and installing are shown only on one equipment variant and can differ from the actual equipment variant. 
• Some steps must be carried out automatically. 

1. Remove rear underbody cover -1-  .
   1. 1.1 Unscrew nuts -2-  on rear underbody cover -1-  .
   2. 1.2 Unscrew screws -3-  on rear underbody cover -1-  .
   3. 1.3 Remove rear underbody cover -1-  .
   Fig 1: Rear Underbody Cover Component Location

   

   Removing rear underbody cover