Removing Dashboard Bracket (Main Bracket)

1. Unclip electric wire harnesses -1-  on dashboard bracket (main bracket) -2-  .

   Electric wire harnesses

2. Remove centre support -4-  .
   1. 2.1 Loosen carpet at the left in the centre console area as far as required until screw -3-  at the bottom left is accessible.

      > 704119 Removing and installing carpet 

   2. 2.2 Unscrew screws -3-  .

      Centre support

   3. 2.3 Pull off centre air ducts -8-  .

      Centre air ducts

   4. 2.4 Remove centre support -4-  .

   Centre support

3. Unscrew nuts -5-  .

   Nuts on dashboard bracket (main bracket)

   CAUTION: Pointed or sharp objects 

   • Risk of cracks, pricks or cuts 

     → Wear personal protective gear.

4. Unscrew screws -6-  and loosen dashboard bracket (main bracket) -2-  from dashboard bracket (front bracket).

   Dashboard bracket (main bracket) on dashboard bracket (front bracket)

   Information 

   The help of another person is required.

5. Unscrew screws -7-  and remove dashboard bracket (main bracket).

Fig 1: Dashboard Bracket (Main Bracket) Component Location

Dashboard bracket (main bracket)