Technical Values
| Location | Des... | Type | Basic val... | Toleranc... | Toleranc... |
|---|---|---|---|---|---|
| Clinch point | Bore diameter | 4 mm | |||
| Dimension A | Dimension | 90 mm | |||
| Dimension X | Distance | 40 mm | |||
| Dimension Y | Distance | 40 mm | |||
| Dimension Z | Distance | 80 mm | |||
| Clinch point | Bore diameter | 4 mm | |||
| Applying adhesive | Application depth | 3 mm | |||
| Applying adhesive | Application depth | 3 mm | |||
| Applying adhesive on roof support system reinforcement | Application depth | 3 mm | |||
| Bore | Bore diameter | 4 mm | |||
| Applying adhesive | Application depth | 0.5 mm | |||
| Applying adhesive | Application depth | 0.5 mm | |||
| Bead of adhesive | Application depth | 3 mm |