Preparing Connection Areas Of Body For Installing The Roof (Full Roof)
- Align the sealing surface and connections of the body.
- Deburr connection points and prepare them for joining.
Information
- Before final assembly, make sure you fully understand all the work steps involved and carry out a trial assembly without applying adhesive.
- The bonding process can only be carried out reliably when a smooth and swift sequence of operations is guaranteed.
- Do not begin bonding work until all materials and tools necessary for later repair work are available.
- Prepare marked areas for bonding, riveting and welding.
> 5X00IN21 APPLYING BODY STRUCTURAL ADHESIVE
- 3.1 Prepare marked areas for bonding and riveting.
Bonding and rivet areas
- 3.2 Prepare marked areas for welding.
Welding areas
- 3.1 Prepare marked areas for bonding and riveting.