Removing Roof (Panoramic Roof)

Disconnect connection points.

Disconnecting connection points
1. 1.1 Remove punch rivets -A- using > VAS 852 001 - Body Dent Removal System, Aluminium and > VAS 6790 - Compact Booster .
  > 5X00IN REPLACING PUNCH RIVETS AND PENETRATED JOINTS
2. 1.2 Drill through clinch points -B- . > Bore diameter 4 mm
3. 1.3 Punch and align holes for flow-form rivets.
  > 5X00IN23 REPLACING PUNCH RIVETS AND PENETRATED JOINTS
4. 1.4 Grind down welded seams -C- .
Heat up bonding areas.

Heating up bonding areas
Remove roof (panoramic roof).