Installing Rear Part Of Front Wheel Housing Liner

Position rear part of front wheel housing liner.
Screw in and tighten upper screws -3- and nut -2- in front part of wheel housing liner. > Tightening torque 2.5 Nm ((1.8 ftlb.)

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Screws and nuts in front wheel housing liner
Screw in and tighten screws -1- and nut -2- . > Tightening torque 2.5 Nm ((1.8 ftlb.)

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Screws and nut on rear part of front wheel housing liner
Screw in and tighten nuts -2- on cover for front underbody -3- . > Tightening torque 2.5 Nm ((1.75 ftlb.)

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Nuts on cover for front underbody
Screw in and tighten screws -1- on cover for front underbody. > Tightening torque 2.5 Nm ((1.75 ftlb.)

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Screws on cover for front underbody