Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Screw for vibration damper | M16 x 1.5 x 75/replace | Initial tightening | 150 Nm (111 ftlb.) | ||
| Screw for vibration damper | M16 x 1.5 x 75/replace | Final tightening | 90° | ||
| Screws securing counterhold tool to crankcase | Item 4 | Tightening torque | 23 Nm (17 ftlb.) | ||
| Screws securing counterhold tool to crankcase | Item 4 | Tightening torque | 23 Nm (17 ftlb.) |