LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2022 >> Macan Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (13 Engine - Crank Drive, Pistons 2.9L -- 95B - MACAN (95B)) >> WM, 137319 Removing And Installing Belt TENSIONER (Generator) (V6 Turbo) >> Install Belt TENSIONER Damper (Generator)

Install Belt TENSIONER Damper (Generator)

WARNING: This page is about a different variant/trim than selected.
  1. Installation is performed in reverse order. Pay particular attention to the following:
    1. 1.1  Fit in and tighten new  screws.
      • Initial tightening 8 Nm (6 ftlb.) 
      • Final tightening + 45° 
scientia non olet · About LEMON Manuals