Subsequent Work

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Oil windage tray

1. 1.1  Position oil windage tray -1-  on cylinder block.
2. 1.2  Replace screws for oil windage tray -2 and 3-  .
3. 1.3 Fit new  screws securing oil windage tray to cylinder block -2-  and tighten in diagonally opposite sequence.

M6 x 18 (3 ea.): 

• Initial tightening 3 Nm (2 ftlb.) 
• Final tightening + 90° 

M6 x 30 (13 ea.): 

• Initial tightening 3 Nm (2 ftlb.) 
• Final tightening + 90° 

• Initial tightening 3 Nm (2 ftlb.) 
• Final tightening + 90° 

• Removing and installing oil guide housing (V6 Turbo) 

Removing and installing cylinder head