LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2022 >> Macan Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 14 (40 Wheel Suspension Front Drive Shaft 2.9L -- 95B - MACAN (95B)) >> WM, 407819 Removing And Installing Connecting Link For Anti-Roll Bar >> Removing Connecting Link For Anti-Roll Bar

Removing Connecting Link For Anti-Roll Bar

WARNING: This page is about a different variant/trim than selected.
  1. Remove connecting link for anti-roll bar -1-  .
    G15155877Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Connecting link for anti-roll bar

    1. 1.1 Unscrew nut on connecting link for anti-roll bar -3-  and counter at screw -2-  .
    2. 1.2 Unscrew screw securing connecting link for anti-roll bar -4-  to the spring strut fork.
    3. 1.3 Remove connecting link for anti-roll bar -1-  .
  2. Replace screws and nuts securing connecting link for anti-roll bar.
scientia non olet · About LEMON Manuals