LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2022 >> Macan Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 14 (40 Wheel Suspension Front Drive Shaft 2.9L -- 95B - MACAN (95B)) >> WM, 407719 Removing And Installing Front Anti-Roll Bar >> Removing And Installing Front Anti-Roll Bar >> Removing Front Anti-Roll Bar

Removing Front Anti-Roll Bar

WARNING: This page is about a different variant/trim than selected.
WARNING: Danger of objects or loads falling down 
  • Risk of squashing or crushing 

    → Secure components to prevent them from falling down.

  1. Remove anti-roll bar -1-  .
    G15155872Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Front anti-roll bar

    1. 1.1 Unscrew nuts -3-  and counter at the screws -2-  at the same time.
    2. 1.2 Unscrew nuts -4-  and remove anti-roll bar clamps -5-  .
    3. 1.3 Lead out stabiliser -1-  with bearing.
  2. Replace screws and nuts.
scientia non olet · About LEMON Manuals