Measuring Cylinder Bore
WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
- Using the cylinder gauge VAS 6078,
take measurements as shown > Diagram for measuring cylinder bore
at three points in the cylinder, crosswise in transverse direction A
and in longitudinal direction B.
Diagram for measuring cylinder bore
Cylinder bore New in mm Maximum permitted deviation from nominal measurement in mm Note Nominal measurement 84.510 ± 0.005 0.08 Measure cylinder bore depth of 50 mm.