LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2022 >> Macan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 28 (42 Rear Wheel Suspension Drive Shaft 3.0L -- 95B - MACAN (95B)) >> WM, 425219 Removing And Installing Wheel Bearing Housing >> Preliminary Work

Preliminary Work

WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Unscrew drive shaft screw -1-  .
    G15154921Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Drive shaft screw

    1. 1.1 Pull off hub cap -2-  using > 9229/1 - puller hook  .
    2. 1.2 Loosen screw on drive shaft -1-  and get a second mechanic to press the brake at the same time.
    3. 1.3 Unscrew drive shaft screw -1-  .
  2. Remove rear brake disc.

    > 465319 - REMOVING AND INSTALLING REAR BRAKE DISC - SECTION ON "REMOVING"

  3. Depending on equipment: 

    Remove coil spring or air spring bellows.

    > 427219 - REMOVING AND INSTALLING COIL SPRING - SECTION ON "REMOVING" 

    > 434319 - REMOVING AND INSTALLING AIR SUSPENSION BELLOWS - SECTION ON "REMOVING"

  4. Remove rear speed sensor.

    > 451519 - REMOVING AND INSTALLING REAR SPEED SENSOR - SECTION ON "REMOVING"

scientia non olet · About LEMON Manuals