LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2022 >> Macan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (37 Automatic Transmission - Actuator, Housing 3.0L -- 95B - MACAN (95B)) >> WM, 373437 Disassembling And Assembling The Double Clutch Transmission >> Disassembling And Assembling The Double Clutch Transmission >> Assembling Double Clutch Transmission

Assembling Double Clutch Transmission

WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install sensor module.

    > 381919 - REMOVING AND INSTALLING SENSOR MODULE

  2. Install wire harness.

    > 381819 - REMOVING AND INSTALLING WIRE HARNESS

  3. Install sealing ring for front output shaft.

    > 387055 - REPLACING SEALING RING FOR FRONT OUTPUT SHAFT

  4. Install ATF pump.

    > 385619 - REMOVING AND INSTALLING ATF PUMP

  5. Install control mechanism for transmission.

    > 387719 - REMOVING AND INSTALLING TRANSMISSION CONTROL MECHANISM

  6. Install ATF pan.

    > 375519 - REMOVING AND INSTALLING ATF PAN 

  7. Install drive shaft bearing.

    > 380919 - REMOVING AND INSTALLING DRIVE SHAFT BEARING

  8. Install sealing ring for double clutch.

    > 386955 - REMOVING AND INSTALLING SEALING RING FOR DOUBLE CLUTCH

  9. Install double clutch.

    > 304919 - REMOVING AND INSTALLING DOUBLE CLUTCH

  10. Install drive plate.

    > 136319 - REMOVING AND INSTALLING DRIVE PLATE

  11. Install halfshaft flange.

    > 392519 - REMOVING AND INSTALLING HALFSHAFT FLANGE

scientia non olet · About LEMON Manuals