Technical Values
WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance1 | Tolerance2 |
|---|---|---|---|---|---|
| The screws on the top of the holder of the distance measuring sensor control unit | Position 3 | Tightening torque | 8 Nm | ||
|
Distance measuring sensor control unit |
|||||
| The screws on the bottom of the holder of the distance measuring sensor control unit | Position 3 | Tightening torque | 2.5 Nm | ||
|
Distance measuring sensor control unit |