Technical Values
WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance1 | Tolerance2 |
|---|---|---|---|---|---|
| Screws on protective plate for supply line section on underbody | Tightening torque | 9 Nm (6.5 ftlb.) | |||
| Screw on line bracket for supply line section on underbody | Tightening torque | 9 Nm (6.5 ftlb.) | |||
| Screw on line bracket for supply line section in engine compartment | Tightening torque | 9 Nm (6.5 ftlb.) | |||
| Screw on line bracket for supply line section at high-pressure pump | Tightening torque | 9 Nm (6.5 ftlb.) | |||
| Nuts securing line bracket for supply line section at high-pressure pump | Tightening torque | 9 Nm (6.5 ftlb.) | |||
| Union nut for fuel line | Coat thread on union nuts with Microgleit DF 977S. Observe drying time of at least 5 minutes before fitting. | tightening torque of | 10 Nm (7.4 ftlb.) |