LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2022 >> Macan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (21 Exhaust Gas Turbocharging 3.0L -- 95B - MACAN (95B)) >> WM, 214119 - Removing And Installing Pressure Pipe (V6 MONOTURBO) >> Removing Pressure Pipe >> Removing Pressure Pipe (From Charge-Air Cooler To Top Of Charge-Air Cooler)

Removing Pressure Pipe (From Charge-Air Cooler To Top Of Charge-Air Cooler)

WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove pressure pipe -1-  .
    G15151407Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Pressure pipe (from charge-air cooler to top of charge-air cooler)

    1. 1.1  Unscrew screws for pressure pipe -2-  .
    2. 1.2  Loosen screw-type clamps -3-  and pull pressure pipe -1-  out of the pressure hoses -4-  .
    3. 1.3  Detach rubber holder -5-  and remove pressure pipe -1-  by pulling it forward.
scientia non olet · About LEMON Manuals