LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2022 >> Macan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (21 Exhaust Gas Turbocharging 3.0L -- 95B - MACAN (95B)) >> WM, 214119 - Removing And Installing Pressure Pipe (V6 MONOTURBO) >> Removing Pressure Pipe >> Removing Pressure Pipe (From Charge-Air Cooler To Bottom Of Charge-Air Cooler)

Removing Pressure Pipe (From Charge-Air Cooler To Bottom Of Charge-Air Cooler)

WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove cover -1-  on both sides of the vehicle.
    G15151408Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Cover

    1. 1.1  Disengage retaining lugs on covers -2-  .
    2. 1.2  Unclip clips on covers -3-  .
    3. 1.3 Right side only: 

      Release and disconnect electric plug connection on the temperature sensor.

    4. 1.4  Remove covers -1-  .
  2. Remove pressure pipe -1-  .
    G15151409Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Pressure pipe (from charge-air cooler to bottom of charge-air cooler)

    1. 2.1  Loosen screw-type clamps -2-  .
    2. 2.2  Detach rubber holder -3-  .
    3. 2.3  Pull pressure pipe -1-  out of the pressure hoses -4-  and remove it.
scientia non olet · About LEMON Manuals