Installing Brake Fluid Reservoir
WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
- Installation is performed in reverse order. Pay particular attention to the following:
Brake fluid reservoir
- 1.1 Tighten screw on brake fluid reservoir -3-
.
> Tightening - torque 5 Nm (3.5 ftlb.)
- 1.2 Fill brake fluid into the brake fluid reservoir until the brake fluid level is between MIN and MAX.
- 1.3 Remove any emerging brake fluid immediately using suitable aids; clean affected components with water and dry them.
- 1.1 Tighten screw on brake fluid reservoir -3-
.