Removing Cylinder Head - Left Cylinder Bank

WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

Remove coolant pipe -1- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Coolant pipe
1. 1.1 Unscrew screws for coolant pipe -2- .
2. 1.2 Remove coolant pipe -1- .
  1. 1.2.1 Replace O-rings.
Remove coolant control valve -1- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Coolant control valve
1. 2.1 Pull off vacuum hose -3- .
2. 2.2 Unscrew screws on coolant control valve -2- .
3. 2.3 Pull coolant control valve -1- off the coolant pipe -4- .
Remove guide for oil dipstick -1- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Oil dipstick guide
1. 3.1 Remove screw -2- .
2. 3.2 Pull guide for oil dipstick -1- _ up out of the crankcase c over.
  1. 3.2.1 Replace O-ring.
Remove coolant vent line -1- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Coolant vent line
1. 4.1 Remove screw -2- .
2. 4.2 Pull line connection out of the cylinder head.
  1. 4.2.1 Replace O-ring.
Remove coolant line -1- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Coolant line - left cylinder bank
1. 5.1 Remove screw -2- .
2. 5.2 Pull line connection out of the cylinder head.
  1. 5.2.1 Replace O-ring.
Loosen guide rail -1- from left cylinder head.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Guide rail on left cylinder head
1. 6.1 Remove screw -2- .
Remove cylinder head -11- .

Fig 1: Cylinder Head Screws Loosening Sequence (Left Cylinder Bank)
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Cylinder head - left cylinder bank
1. 7.1 Unscrew screws on cylinder head in the sequence -10 to 1- .
  1. 7.1.1 Replace screws on cylinder head.
2. 7.2 Remove cylinder head -11- .
  1. 7.2.1 Replace cylinder-head gasket.