LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2022 >> Macan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (15 Engine - Cylinder Head, Valve Drive 3.0L -- 95B - MACAN (95B)) >> WM, 153919 - Removing And Installing Camshaft Controller Actuator (V6 Turbo) >> Subsequent Work

Subsequent Work

WARNING: This page is about a different car, the 2021 Porsche Macan, 2020 Porsche Macan, and 2019 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install front strut.

    > 408619 - REMOVE AND INSTALL FRONT STRUT

  2. Install heat shield.

    > 261219 - REMOVING AND INSTALLING HEAT SHIELD (V6 TURBO)

  3. Only after removing camshaft controller actuator on intake side of cylinder bank 1: 

    Fill up coolant.

    > 193817 - DRAINING AND FILLING COOLANT

scientia non olet · About LEMON Manuals