Removing Supply Line - Fuel Tank Section
WARNING:
Highly inflammable or explosive materials
- Danger of fire or explosion
- → Avoid contact with hot parts or sources of ignition.
- → Use suction to remove ignitable vapours.
- → Attach warning sign in a clearly visible position.
- → Contain leaked media using non-flammable absorbent material and put it in a container designed for this purpose for disposal in accordance with local requirements.
- → Secure collection containers/vessels to prevent them from tipping over.
WARNING:
Toxic substances
- Danger of poisoning or suffocation
- Danger of burns to the eyes and skin
- → Ventilate the work area well.
- → Never ingest or inhale.
- → Read specific information on the Hazard Sheet.
- → Wear personal protective gear.
- → Do not smoke, eat or drink in the work area.
- Remove fuel tank section -1-
of the supply line.
Supply line - fuel tank section
- 1.1 Release and disconnect quick connector -2- on supply line at the fuel pump.
- 1.2 Soak up escaping fuel using suitable aids and close off line connections using suitable stoppers.
- 1.3 Unclip supply line -1- from the guide at the fuel tank and remove it.