Removing Outside Temperature Sensor
NOTIFICATION
Voltage peaks
- Risk of damage to electrical load or to the control unit
- → Switch off ignition and keep transmitter key outside of the transmission range (at least 5 m).
- → Switch off electrical loads before disconnecting or removing them.
- Switch off ignition and pull remote control out of ignition lock.
- Remove outside temperature sensor -2-
.
Outside temperature sensor
- 2.1 Swivel right flap -1- of the air guide forward.
- 2.2 Pull outside temperature sensor -2- out of the right flap -1- .
- 2.3 Release and unplug electric plug connection -3- .