Removing Electronic Adjuster For Turbocharger

WARNING: This page is about a different variant/trim than selected.

CAUTION: Hot components

Risk of burns
- → Let hot components cool down.
- → Wear personal protective gear.

Remove electronic adjuster for turbocharger -1 -.
1. 1.1 Unclip linkage -7 - using a plastic wedge.
2. 1.2 Loosen and unscrew screw -3 -.
3. 1.3 Loosen and unscrew screw -4 - using > 9824/2 - Torx Micro Bit T30 and an 8-mm ratchet ring wrench.
4. 1.4 Loosen and unscrew screws -5 - and -6 -.
5. 1.5 Remove electronic adjuster -1 - and heat shield -2 -.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.