Removing And Installing Cover For Centre Underbody At The Sides

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2021 Porsche 718 Cayman, 2021 Porsche 718 Boxster, 2020 Porsche 718 Cayman, 2020 Porsche 718 Boxster, and 2019 Porsche 718 Cayman. However, it is still accessible from the selected car via links, so may be relevant.

Unscrew nuts -3- .
Unscrew screws and remove underbody cover at the sides -1- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Removing underbody cover at the sides
Installation is performed in reverse order. Pay particular attention to the following:
Tightening torque for nut on centre underbody cover at the sides: > Tightening torque 2.7 Nm (1.75 ftlb.) 1 +/- 0.2 Nm (0.1 ftlb.)

Tightening torque for screw on centre underbody cover at the sides: > Tightening torque 2.7 Nm (1.75 ftlb.) 1 +/- 0.2 Nm (0.1 ftlb.)