LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2022 >> 718 Boxster Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (51 - Body Center, Roof, Frame) >> WM, 519219 Removing And Installing Cover For Front Underbody >> Preliminary Work >> Removing and installing cover for front underbody

Removing and installing cover for front underbody

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2021 Porsche 718 Cayman, 2021 Porsche 718 Boxster, 2020 Porsche 718 Cayman, 2020 Porsche 718 Boxster, and 2019 Porsche 718 Cayman. However, it is still accessible from the selected car via links, so may be relevant.
  1. Unscrew nuts -3-  .
  2. Unscrew screws and remove cover for front underbody -1-  .
    G14270120Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Removing cover for front underbody

  3. Installation is performed in reverse order. Pay particular attention to the following.

    Tightening torque for screw securing front underbody cover: > Tightening torque 2.7 (1.75 ftlb) Nm +/- 0.2 N.m (0.1 ft.lb) 

    Tightening torque for nut securing front underbody cover: > Tightening toroue 2.7 (1.75 ftlb) Nm +/- 0.2 N.m (0.1 ft.lb) 

scientia non olet · About LEMON Manuals