LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2022 >> 718 Boxster Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (51 - Body Center, Roof, Frame) >> WM, 516819 Removing And Installing Dashboard Bracket >> Replacing Holder For Dashboard Bracket

Replacing Holder For Dashboard Bracket

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2021 Porsche 718 Cayman, 2021 Porsche 718 Boxster, 2020 Porsche 718 Cayman, 2020 Porsche 718 Boxster, and 2019 Porsche 718 Cayman. However, it is still accessible from the selected car via links, so may be relevant.

Information 

Screws -1-  remain in holder for dashboard bracket.

  1. Remove holder for dashboard bracket.
    1. 1.1  Loosen screws -1- 1)  .
    2. 1.2  Remove holder for dashboard bracket with screws -1-  .
      G14270601Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      Removing holder for dashboard bracket

      1) Loosen screws gradually in alternating sequence to prevent tilting.

  2. Install new holder for dashboard bracket.
    1. 2.1  Position holder for dashboard bracket with existing screws in installation position.
    2. 2.2  Screw in and tighten screws > Tightening torque 23 N.m (17 ft.lb) 
      G14270602Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      Installing holder for dashboard bracket

scientia non olet · About LEMON Manuals