LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2022 >> 718 Boxster Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (55 - Lids, Flaps) >> WM, 559319 Removing And Installing Rear Pneumatic Spring >> Function Test

Function Test

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2021 Porsche 718 Cayman, 2021 Porsche 718 Boxster, 2020 Porsche 718 Cayman, 2020 Porsche 718 Boxster, and 2019 Porsche 718 Cayman. However, it is still accessible from the selected car via links, so may be relevant.

Function test 

  1. Open and close the lid several times to check that the pneumatic spring works correctly and was fitted correctly.
  2. Open the lid fully. The pneumatic spring must hold the lid in its open position.
  3. Close the lid.
scientia non olet · About LEMON Manuals