Removing and installing rear lid hinge
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2021 Porsche 718 Cayman, 2021 Porsche 718 Boxster, 2020 Porsche 718 Cayman, 2020 Porsche 718 Boxster, and 2019 Porsche 718 Cayman. However, it is still accessible from the selected car via links, so may be relevant.
Information
- The rear lid hinge at the left or right cannot be replaced without removing the rear lid. The help of another person is required for this.
- Unscrew and remove inner screw -1- on rear lid hinge at the left or right.
- Unscrew and remove outer screw -2-
on rear lid hinge at the left or right.
Loosening rear lid hinge
- Unscrew nuts -2 or 3-
on the body at the left or right.
Removing rear lid hinges
- Remove rear lid hinge at the left or right.
- Installation is performed in reverse order.
- Screw in and tighten nut on the body at the left or right. > Tightening torque 23 N.m (17 ft.lb)
- Screw in and tighten outer screw in rear lid hinge at the left or right. > Tightening torque 10 N.m (7.5 ft.lb)
- Screw in and tighten inner screw in rear lid hinge at the left or right. > Tightening torque 10 N.m (7.5 ft.lb)