LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2022 >> 718 Boxster Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (55 - Lids, Flaps) >> WM, 558619 Removing And Installing Lower Part Of Rear Lid Lock >> Preliminary Work >> Removing and installing lower part of rear lid lock

Removing and installing lower part of rear lid lock

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2021 Porsche 718 Cayman, 2021 Porsche 718 Boxster, 2020 Porsche 718 Cayman, 2020 Porsche 718 Boxster, and 2019 Porsche 718 Cayman. However, it is still accessible from the selected car via links, so may be relevant.
  1. Unscrew screws -2-  and remove lower part of rear lid lock -1-  .
    G14271264Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Removing lower part of lid lock at rear

  2. Installation is performed in reverse order. Pay particular attention to the following:

    Tightening torque for screws for lower part of rear lid lock: > Tightening torque 10 N.m (7.5 ft.lb) 

scientia non olet · About LEMON Manuals