LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2022 >> 718 Boxster Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (55 - Lids, Flaps) >> WM, 558319 Removing And Installing Rear Lid Release Cable >> Removing And Installing Rear Lid Release Cable

Removing And Installing Rear Lid Release Cable

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2021 Porsche 718 Cayman, 2021 Porsche 718 Boxster, 2020 Porsche 718 Cayman, 2020 Porsche 718 Boxster, and 2019 Porsche 718 Cayman. However, it is still accessible from the selected car via links, so may be relevant.
  1. Unclip rear lid release cable -1 -  (-arrows-). 
    G14271296Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Disconnecting rear lid release cable

  2. Unclip rear lid release cable -1-  from the metal clip -2-  at the rear lid lock -arrow-. 
  3. Turn bowden cable -arrow A-  and pull it out of the lever -3-  (-arrow a-). 
  4. Remove rear lid release cable -1-  .
    G14271297Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Removing rear lid release cable

  5. Installation is performed in reverse order.
scientia non olet · About LEMON Manuals