LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2022 >> 718 Boxster Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (55 - Lids, Flaps) >> WM, 556319 Removing And Installing Rear Emergency Release >> Removing And Installing Rear Emergency Release

Removing And Installing Rear Emergency Release

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2021 Porsche 718 Cayman, 2021 Porsche 718 Boxster, 2020 Porsche 718 Cayman, 2020 Porsche 718 Boxster, and 2019 Porsche 718 Cayman. However, it is still accessible from the selected car via links, so may be relevant.
G14271292Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Installation position of rear emergency release (shown on the 981)

  1. Unscrew screw -2-  and loosen rear emergency release -1-  .
    G14271293Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Removing rear emergency release

  2. Disconnect electric plug connection -arrow A-  and remove rear emergency release -1-  .
    G14271294Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Disconnecting electric plug connection

  3. Installation is performed in reverse order.