LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2022 >> 718 Boxster Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (55 - Lids, Flaps) >> WM, 553819 Removing And Installing Switching Element For Filler Flap >> Preliminary Work >> Removing switching element for filler flap

Removing switching element for filler flap

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2021 Porsche 718 Cayman, 2021 Porsche 718 Boxster, 2020 Porsche 718 Cayman, 2020 Porsche 718 Boxster, and 2019 Porsche 718 Cayman. However, it is still accessible from the selected car via links, so may be relevant.
  1. Release electric plug connection for filler flap switching element -arrow-  and disconnect it -A-  .
    G14271252Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Disconnecting electric plug connection for filler flap switching element

  2. Remove filler flap switching element.
    G14271253Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Removing switching element for filler flap

    1. 2.1  Turn the filler flap switching element -A-  until it is released.
    2. 2.2  Pull out filler flap switching element -B-  .
  3. Press cover on switching element -1-  apart at the locking lugs and unclip it.
    G14271254Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Unclipping cover on filler flap switching element

  4. Block filler flap switching element -A-  and disengage emergency release -B-  .
    G14271255Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Disengaging emergency release from filler flap switching element

scientia non olet · About LEMON Manuals