LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2022 >> 718 Boxster Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (55 - Lids, Flaps) >> WM, 553719 Removing And Installing Filler Flap >> Preliminary Work >> Removing filler flap

Removing filler flap

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2021 Porsche 718 Cayman, 2021 Porsche 718 Boxster, 2020 Porsche 718 Cayman, 2020 Porsche 718 Boxster, and 2019 Porsche 718 Cayman. However, it is still accessible from the selected car via links, so may be relevant.
  1. Coat drain hose -1-  with sliding compound if necessary and pull it off the filler flap.
    G14271248Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Pulling drain hose off filler flap

  2. Remove inner part of filler flap.
    G14271249Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Removing inner part of filler flap

    1. 2.1  Release locking lugs on inner part of filler flap -arrow A-. 
    2. 2.2  Press rubber sleeve in direction of arrow -arrow B-  .
    3. 2.3  Swivel the filler flap out of the body aperture -arrow C-  .
  3. Release locking lug on outer part of filler flap -arrow A-  and pull off outer part of filler flap -arrow B-  .
    G14271250Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Removing outer part of filler flap

scientia non olet · About LEMON Manuals