LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2022 >> 718 Boxster Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (55 - Lids, Flaps) >> WM, 552319 Removing And Installing Proximity Sensor For Front Lid >> Removing Proximity Sensor For Front Lid

Removing Proximity Sensor For Front Lid

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2021 Porsche 718 Cayman, 2021 Porsche 718 Boxster, 2020 Porsche 718 Cayman, 2020 Porsche 718 Boxster, and 2019 Porsche 718 Cayman. However, it is still accessible from the selected car via links, so may be relevant.
  1. Release electric plug connection -1 -  (-arrow a-)  and pull off the connector -arrow A-  .
    G14271240Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Disconnecting electric plug connection

  2. Unclip proximity sensor -2-  from the bracket -3-  , detach it from the bonding area and remove it -arrow A-  .
    G14271241Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Removing proximity sensor

  3. Remove all adhesive residue from the front apron bracket before re-installation.
scientia non olet · About LEMON Manuals