LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2022 >> 718 Boxster Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (55 - Lids, Flaps) >> WM, 551819 Removing And Installing Upper Part Of Front Lid Lock >> Removing And Installing Upper Part Of Front Lid Lock

Removing And Installing Upper Part Of Front Lid Lock

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2021 Porsche 718 Cayman, 2021 Porsche 718 Boxster, 2020 Porsche 718 Cayman, 2020 Porsche 718 Boxster, and 2019 Porsche 718 Cayman. However, it is still accessible from the selected car via links, so may be relevant.

Information 

Use new screws following removal.

  1. Unscrew screws -1-  and remove upper part of front lid lock -2-  .
    G14271283Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Removing upper part of front lid lock

  2. Installation is performed in reverse order. Pay particular attention to the following:

    Tightening torque for screws for upper part of front lid lock: > Tightening torque 10 N.m (7.5 ft.lb) 

scientia non olet · About LEMON Manuals