LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2022 >> 718 Boxster Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (55 - Lids, Flaps) >> WM, 551019 Removing And Installing Release For Front Lid >> Preliminary Work >> Removing and installing release for front lid

Removing and installing release for front lid

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2021 Porsche 718 Cayman, 2021 Porsche 718 Boxster, 2020 Porsche 718 Cayman, 2020 Porsche 718 Boxster, and 2019 Porsche 718 Cayman. However, it is still accessible from the selected car via links, so may be relevant.
  1. Unclip actuator for front lid -arrows A-  and remove it from the inner door sill trim on the driver's side -arrow B-  .
    G14271273Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Removing front lid release

  2. Installation is performed in reverse order.
scientia non olet · About LEMON Manuals