LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2022 >> 718 Boxster Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (50 - Body Front) >> WM, 509555 Replacing Body Front Section >> Preparing Connection Areas Of Body For Installing Body Front Section

Preparing Connection Areas Of Body For Installing Body Front Section

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2021 Porsche 718 Cayman, 2021 Porsche 718 Boxster, 2020 Porsche 718 Cayman, 2020 Porsche 718 Boxster, and 2019 Porsche 718 Cayman. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
  • Before final assembly, make sure you fully understand all the work steps involved and carry out a trial assembly without applying adhesive.
  • The bonding process can only be carried out reliably when a smooth and swift sequence of operations is guaranteed.
  • Do not begin bonding work until all materials and tools necessary for later repair work are available.
  1. Straighten sealing surface and connection areas of the body.
  2. De-burr connection areas and prepare for welding.
  3. Prepare marked areas for welding and bonding.
    G14269604Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Preparing connection areas

  4. Prepare connection areas on cowl panel.
    G14269605Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Preparing connection areas on cowl panel

scientia non olet · About LEMON Manuals