Cavity Preservation
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2021 Porsche 718 Cayman, 2021 Porsche 718 Boxster, 2020 Porsche 718 Cayman, 2020 Porsche 718 Boxster, and 2019 Porsche 718 Cayman. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
- In the event of repairs, standard cavity preservation must be applied to the accessories on the body according to the following illustrations.
- Do not apply cavity preservation until you have completed the required assembly work.
IMPORTANT:
Cavity preservation wax is applied using a flow-coating procedure.
- Guide the long probe through the cable duct opening -1-
and apply cavity preservation to the inside of the bulkhead -22-
and the floor of the reinforcement -3-
.
A-pillar area and inner bulkhead
- Apply cavity preservation through the openings on the underside of the side skirt -1 and 2-
to the inside of the side skirt -3-
and bulkhead -4-
.
Side skirt area and inner bulkhead