LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2022 >> 718 Boxster Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (50 - Body Front) >> WM, 508419 Removing And Installing Battery Console >> Removing And Installing Battery Console

Removing And Installing Battery Console

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2021 Porsche 718 Cayman, 2021 Porsche 718 Boxster, 2020 Porsche 718 Cayman, 2020 Porsche 718 Boxster, and 2019 Porsche 718 Cayman. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: Always comply with the regulations for handling ESD-sensitive components!
  • Always wear approved work clothes and shoes when carrying out assembly work.
  • Do not remove new parts from ESD (electrostatic discharge) protective packaging until shortly before installation.
  • Do not touch electric pins and plug contacts.
  1. Unscrew and remove screws -2-  on battery console
    G14269525Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Detaching battery console

  2. Carefully lift the battery console and turn it around until the electric plug connection -2-  is accessible.
  3. Disconnect electric plug connection -2-  on the fuel pump control unit
  4. Remove battery console with fuel pump control unit
    G14269526Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Removing battery console

  5. Installation is performed in reverse order. Pay particular attention to the following:

    Tightening torque for screw on battery console: > Tightening torque 23 N.m (17 ft.lb) 

scientia non olet · About LEMON Manuals