WM, 507955 Replacing Front Side Member (Section): Notes
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2021 Porsche 718 Cayman, 2021 Porsche 718 Boxster, 2020 Porsche 718 Cayman, 2020 Porsche 718 Boxster, and 2019 Porsche 718 Cayman. However, it is still accessible from the selected car via links, so may be relevant.
PART DESCRIPTION
| Part number | Description | Addition | Quantity |
|---|---|---|---|
| > N10760801 | RIVET SCREW N107 608 01 | 1 | |
| > 99907354901 | countersunk screw 999.073.549.01 | 7 | |
| > 99919022701 | BLIND RIVET 999.190.227.01 | ||
| > 99919023001 | BLIND RIVET 999.190.230.01 | ||
| > 99919023001 | BLIND RIVET 999.190.230.01 | ||
| > 99919022901 | BLIND RIVET 999.190.229.01 | ||
| > 99919022901 | BLIND RIVET 999.190.229.01 |
TOOL DESCRIPTION
| Tool denomination | Type | Tool number | Image |
|---|---|---|---|
| twist drill | Commercially available tool | > Nr.201 | |
| Hot-Air Blower | General workshop equipment | > V.A.G 1416 |
TECHNICAL VALUE SPECIFICATION
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Side member connection point | Large cut | Length | 180 mm | ||
| Connection point for longitudinal member | Dimension X | Length | 125 mm | ||
| Side member connection point | Outer shell only | Length | 100 mm | ||
| Drill bit | Diameter | 9 mm | |||
| Drill bit | Diameter | 9 mm | |||
| Drill bit | Diameter | 6.5 mm | |||
| Applying adhesive | Spread out evenly | Application depth | 0.5 mm | ||
| Applying adhesive | Spread out evenly | Application depth | 0.5 mm | ||
| Bead of adhesive | Application depth | 5 mm | |||
| Threaded joint on side member | Tightening torque | 15 N.m (11 ft.lb) |